Includes Magazine Only
The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.
The PMAG 15 GL9 is compatible with Glock G19 handguns as well as sub-compact variants with some protrusion below the grip.
This item can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
NOT for use in the new Gen 5 models.
This Micro Conversion Kit is a lightweight and sturdy platform for Sig Sauer P320 handguns, turning it into the ultimate Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Made For Guns WITHOUT Tactical Lights
The new Under Cover inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today. Each holster is custom made for each specific gun ensuring a perfect fit and positive retention. One of the most unique features of the Under Cover holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.
Top Features:
SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
You guys are awesome!! Drove from Raleigh to Watchdog to get a holster made. Took about an hour and holster was awesome!
Appreciate it guys!
You guys are awesome!! Drove from Raleigh to Watchdog to get a holster made. Took about an hour and holster was awesome!
Appreciate it guys!
Made ONLY for Desert Eagle Mark XIX 6″ (.357 Magnum, .44 Magnum, .50AE) DOES NOT FIT DESERT EAGLE MODELS WITH A BOTTOM RAIL
The outside the waistband AND inside the waistband (OWB & IWB) Custom Desert Eagle holster by Watchdog Tactical is one of a kind! This holster comes with Malice straps & a pair of reversible clips that are secured onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Desert Eagle holster, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!!
Made For Guns WITH Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Attack Dog light bearing holster combo set with double magazine holder by Watchdog Tactical is the most versatile holster on the market today.
This light bearing holster utilizes reversible clips that are mounted tightly onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Attack Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two solid belt loop clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!
Made For Guns WITHOUT Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Guard Dog holster with double magazine holder by Watchdog Tactical is the most versatile holster on the market today.
This holster utilizes clips that are mounted through the belt for extra security when drawing the weapon. This holster utilizes reversible clips that are secured onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Guard Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!
Made For Guns WITHOUT Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Guard Dog holster with two single magazine holders by Watchdog Tactical is the most versatile holster on the market today.
This holster utilizes clips that are mounted through the belt for extra security when drawing the weapon. This holster utilizes reversible clips that are secured onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Guard Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!
Made For Guns With Tactical Lights
The new Under Cover Elite is a light bearing, inside the waistband holster made by Watchdog Tactical and one of the best and versatile holster option for deep light bearing concealment carry. Each holster is custom made for each specific gun and light combo ensuring a perfect fit and positive retention. While wearing this light bearing holster inside the waistband, it sits very close to the body and with the proper clothing, is virtually undetectable, even with a full size weapon. One of the most unique features of the Under Cover Elite holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns With Tactical Lights
The new Under Cover Elite is a light bearing, inside the waistband holster made by Watchdog Tactical and one of the best and versatile holster option for deep light bearing concealment carry. Each holster is custom made for each specific gun and light combo ensuring a perfect fit and positive retention. While wearing this light bearing holster inside the waistband, it sits very close to the body and with the proper clothing, is virtually undetectable, even with a full size weapon. One of the most unique features of the Under Cover Elite holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITH Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Attack Dog light bearing holster combo set with two single magazine holders by Watchdog Tactical is the most versatile holster on the market today.
This light bearing holster utilizes reversible clips that are mounted tightly onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Attack Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two solid belt loop clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!
Made For Guns WITH Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Attack Dog light bearing holster combo set with one single magazine holder by Watchdog Tactical is the most versatile holster on the market today.
This light bearing holster utilizes reversible clips that are mounted tightly onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Attack Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two solid belt loop clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!
The new Third Leg inside the waistband holster made by Watchdog Tactical is our most exciting holster and magazine combos yet. This holster is custom made to fit its specific gun and magazine ensuring a perfect fit with positive retention. The Third Leg stays true to our most popular unique feature with the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon and magazine with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying. With its modern and tactical features, you’ll be sure to have the best in the market today.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITHOUT Tactical Lights
The outside the waistband American Paddle holster by Watchdog Tactical is our most minimalistic outside the waistband carry holster ever. This holster utilizes a paddle style “clip” that fits comfortably and securely on the belt for the perfect draw each time. With its sleek paddle clip, this outside the waistband holster hugs the contour of the body and allows for the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the paddle clip and placing it between 0-15 degrees. Retention adjustment is as simple as loosening or tightening the retention screws as desired.
Great for the range and everyday carry!!
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns With Tactical Lights
The new Under Cover Elite is a light bearing, inside the waistband holster made by Watchdog Tactical and one of the best and versatile holster option for deep light bearing concealment carry. Each holster is custom made for each specific gun and light combo ensuring a perfect fit and positive retention. While wearing this light bearing holster inside the waistband, it sits very close to the body and with the proper clothing, is virtually undetectable, even with a full size weapon. One of the most unique features of the Under Cover Elite holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITHOUT Tactical Lights
The new Under Cover inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today. Each holster is custom made for each specific gun ensuring a perfect fit and positive retention. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
The Soft Loops gives you confidence knowing every time you draw your firearm the holster will stay in place!
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITHOUT Tactical Lights
The new Under Cover with Wing inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today. Each holster is custom made for each specific gun ensuring a perfect fit and positive retention. One of the most unique features of the Under Cover with Wing holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying. Its wing clip adds more of a secure pressure to the body making it more comfortable and concealable than ever.
IWB Holster That Fully Covers The Barrel, Comes With One Or Two Magazine Holders.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITHOUT Tactical Lights
Our Under Cover inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today. Each holster is custom made for each specific gun ensuring a perfect fit and positive retention. One of the most unique features of the Under Cover holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
The added Wing option brings the handle of the firearm closer to the body to pull closer to the body for concealment.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITHOUT Tactical Lights
The new Under Cover inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today. Each holster is custom made for each specific gun ensuring a perfect fit and positive retention. One of the most unique features of the Under Cover holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
IWB Holster That Fully Covers The Barrel, Comes With One Or Two Magazine Holders.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITHOUT Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Guard Dog holster with one magazine holder by Watchdog Tactical is the most versatile holster on the market today.
This holster utilizes clips that are mounted through the belt for extra security when drawing the weapon. This holster utilizes reversible clips that are secured onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Guard Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!
Made For Guns WITH Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Attack Dog light bearing holster by Watchdog Tactical is the most versatile holster on the market today. This light bearing holster utilizes reversible clips that are mounted tightly onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Attack Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!
Made For Guns WITHOUT Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Guard Dog holster by Watchdog Tactical is the most versatile holster on the market today. This holster utilizes reversible clips that are secured onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Guard Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!!
Made For Guns WITHOUT Tactical Lights
The new Under Cover inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today. Each holster is custom made for each specific gun ensuring a perfect fit and positive retention. One of the most unique features of the Under Cover holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Out Of Stock
✔ White Light & Green Laser
The Baldr Mini is an ultra-compact white light and green beam combo, integrating the compatibility of the PL-Mini 2 and the accuracy of the Baldr Pro.
The MCKP80 is only for Polymer80 frames that have either a standard Glock 17/19 slide OR Polymer80 frames with a V1/V2 slide
*Does Not fit standard Glock only compatible with Polymer 80
Fits Polymer 80 models V1/V2 for comparable Glock models 17/19/22/23/31
Comes with 2 Charging Handles (One for Glock slides and One for P80 slides)
Equipped with the MCKGEN2 Stabilizer which shoots folded and locked
Rear door extends an additional 15 degrees making it easier to insert and extract the handgun
Accommodates suppressor height sights
Suppressor friendly accommodating a suppressor up to 1.38” diameter
Features an improved spare magazine holder that operates with a mag catch and magazine release button
Compatible with the MCKGEN2 Brass Catcher
Comes standard with polymer top Picatinny rail
All of the Advantages of the MCK for your Polymer 80:
Suppressor/Compensator Ready
No pistol disassembly required—just place pistol into the kit, lock and go
Ergonomic Finger Groove Grip for more stability
Polymer top Picatinny rail for sights and optics
Side Picatinny rails for mounting additional accessories, i.e…thumb rests
Ambidextrous for fast and easy handling
Right-folding stock/arm brace for easy concealment and carry, locks in the folded position
Able to fire from the folded and locked position
Front spare magazine holder for faster reloads
Exposed slide release for direct contact and easier use
The BALDR Pro is a professional lighting tool with green laser sight and white LED for installation on equipment. Powered by two CR123A batteries, the max output of the BALDR Pro is 1350 lumens. The cool white LED and TIR lens makes for a robust search light. The center beam of the BALDR Pro is intense and concentrated, also soft and wide when near the ground. The white LED can also be set to 300 lumens of constant lighting. The beam emitted by the green laser is clearly visible during both night and day.
Equipped with adjustable screws; the light can withstand strong impacts and vibrations without loosening after calibration. It’s easy to install and detach the light by pressing or loosening the side swing arm. The main body of the product is made of aluminum alloy for extremely high strength and reliability. The BALDR Pro is a high-quality choice for professional users with its excellent ease of use, high brightness and extremely powerful performance.
The PL-2 Valkyrie is a super bright compact weapon light on the market using a CREE XHP35 HI Led delivering a scorching 1200 lumens.
The light uses two side by side CR123A batteries in common form factor to the industry for a known and comfortable feel. The light features a TIR optic lens providing a 245-meter-long focused beam that is still wide enough to see all around you to eliminate any blind spots in the dark. The heavy duty quick attach and release mounting system allows the light to have a tight hold on any firearm with a 1913 or Glock style rail.
The ambidextrous switch allows the user to continue to use their preferred grip on the firearm while still being able to activate the switch at a moment’s notice in a high-stress situation.
The PL-2 Valkyrie is a highly powerful self-defense tool which will blind an aggressor at close proximity indoors while still offering an extremely long distance for perfect use on rifles like the AR-15.
The PL-PRO Valkyrie (PL-PRO) is the rechargeable version of the best-selling weaponlight PL-2. Powered by a built-in rechargeable battery, the PL-PRO delivers two adjustable outputs; 1,500 and 300 lumens. The rail adapter allows the PL-PRO to be installed on weapons with a MIL-STD-1913 or Glock rail. It uses a heavy-duty quick attach and release mounting system along with the ambidextrous push-forward/side-press activation switch. The PL-PRO has been upgraded with a lockout mode and a magnetic port that is compatible with the MCC charging cable and remote pressure switch, making it more suitable for use on rifles. With high performance, ease of operation and versatility, the PL-PRO redefines the weaponlight.
*The magnetic remote pressure switch can be connected to the magnetic charging port, making the PL-PRO more suitable for use with a rifle.
*Rechargeable: charging directly by connecting the weaponlight with the included magnetic USB cable. There is no need to remove the battery or plug into a port that will wear out over time.
*Three output modes: momentary on, constant on, strobe.
*Manual quick attach and release mounting system.
*Silent ambidextrous ON/OFF switch for self defense. Push forward or tap the side of the switch to activate.
The PL-MINI 2 Valkyrie is the world’s first compact rechargeable weaponlight with an adjustable rail, which the user can adjust to any length making it compatible with most pistols including subcompacts. It delivers a maximum output of 600 lumens and a beam distance of 100 meters. With a quick attach and release mounting system, install and removal is accomplished within one second.
The switches are conveniently manipulated by pressing down quickly for constant on/off or hold for momentary-on.
The PL-MINI 2 is powered by a built-in lithium polymer battery, which can be charged through our signature magnetic charging port located at the bottom of the light.
With high compatibility, quick attach/release mounting system, and huge performance; the PL-Mini 2 is the optimal weaponlight choice for concealed carry.
FEATURES
✔ Adjustable rail(authorized patent): Slide the rail adapter back and forth freely to fix the light in the desired position for your specific firearm, making the PL-MINI 2 compatible with most pistols including subcompacts.
✔ Huge performance: 600 lumens with 100 meters of throw. Performance comparable to mid-sized weapon lights.
✔ Convenient charging by connecting the light directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time.
✔ Quick install and removal within one second.
✔ Compatible with both Glock (insert already installed) and Picatinny sized rails (insert included in the package).
✔ Ultra-compact and lightweight.
The BALDR RL is a professional lighting tool with red laser sight and white LED for installation on equipment with a Picatinny (MIL-STD-1913) or Glock rail. Powered by two CR123A batteries, the max output of the BALDR RL is 1,120 lumens. The neutral white LED and TIR lens makes for a robust search light. The center beam of the BALDR RL is intense and concentrated, also soft and wide when near the ground. The white LED can also be set to 300 lumens of constant lighting. The beam emitted by the red laser is clearly visible for accurate targeting. Equipped with adjustable screws, the light can withstand strong impacts and vibra- tions without loosening after calibration. It’s easy to install and detach the light by pressing or loosening the side swing arm. The main body of the product is made of aluminum alloy for extremely high strength and reliability. The BALDR RL is a high-quality budget choice for professional users with its excellent ease of use, high brightness and extremely powerful performance.
FEATURES:
(1) With extreme performance of 1,120 lumens and 240 meters beam distance, the BALDR RL is leading the way in compact rail lighting tools.
(2)Three light settings available: You can choose from white LED Only, red laser only, and white LED/ red laser combined by flipping a rotating switch underneath the weapon light.
(3) Safe and easy to adjust 5mW red laser for higher accuracy.
(4)Red laser is suitable for accurate targeting.
(5)Compatible with both Glock rail (installed on the product) and Picatinny rail (included in the package).
(6)Quick mount/detach system.
Out Of Stock
124-grain black-nickel coated bullets in boxes of 20 rounds.
Ballistic Data
Muzzle Velocity: 1105 fps
Muzzle Energy: 336 ft. lbs.
50yd Velocity: 1012 fps
50yd Energy: 282 ft. lbs.
Out Of Stock
Dress up your Glock with this Metallic Parts Kit.
Kit includes the following parts:
Precision Extended Slide Lock
Trigger Pin
Trigger Housing Pin
Locking Block Pin
OEM Extended Slide Stop Lever.
Pins are CNC machined, stainless steel, refinished in chrome, titanium nitride, black oxide, or various cerakote colors… depending on your selection.
The included Extended Slide Lock is 3mm longer than the original (OEM) Glock Slide Lock. This handy item allows you to easily take down (field strip) your Glock pistol.
This parts kit fits all 3 pin Glocks excluding the G36. – 2 pins above the trigger, 1 pin in the backstrap (extended backstrap pin also included for Gen4 models).
Please note: Fits Gen2, Gen3 and Gen4.
The Action Enhancement Kit for Slim Frame Glock pistols (G43, G43X, G48) features the Apex Action Enhancement Trigger, with Trigger Bar, and an Apex Performance Connector. The kit is a direct drop-in replacement of the factory polymer trigger and connector and provides for a smoother trigger pull with reduced travel, reduced reset and a crisp break.
Expected Results
– Direct drop-in replacement of factory polymer trigger and connector
– Smooth uptake and reset
– Reduces trigger pre-travel, overall travel and reset distance
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
Applicable To What Gun(s)
For use in the following Glock model pistols: G43, G43X, G48.
Not for use in the Glock 42.
In The Package
1 ea. Red Anodized Apex Action Enhancement Trigger w/ Trigger Bar for Slim Frame Glock
1 ea. Apex Performance Connector
The Action Enhancement Kit for Slim Frame Glock pistols (G43, G43X, G48) features the Apex Action Enhancement Trigger, with Trigger Bar, and an Apex Performance Connector. The kit is a direct drop-in replacement of the factory polymer trigger and connector and provides for a smoother trigger pull with reduced travel, reduced reset and a crisp break.
Expected Results
– Direct drop-in replacement of factory polymer trigger and connector
– Smooth uptake and reset
– Reduces trigger pre-travel, overall travel and reset distance
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
Applicable To What Gun(s)
For use in the following Glock model pistols: G43, G43X, G48.
Not for use in the Glock 42.
In The Package
1 ea. Red Anodized Apex Action Enhancement Trigger w/ Trigger Bar for Slim Frame Glock
1 ea. Apex Performance Connector
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
NOT for use in the new Gen 5 models.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
Gen 5 Glock model pistols: G17, G19, G19x, G26, G34, G45.
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
GEN 2
8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.
Top Features:
SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
Upgraded Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
Perfect Red/Green Dot Optic
GEN 2
8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.
Top Features:
SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
Standard Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Upgraded Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
Perfect Red/Green Dot Optic
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Standard Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
Gen 5 Glock model pistols: G17, G19, G19x, G26, G34, G45.
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.
Top Features:
SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
This Micro Conversion Kit is a lightweight and sturdy platform for S&W M&P9 2.0/M&P9 2.0 Compact/ M&P40 2.0/ M&P40 2.0 Compact handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
This Micro Conversion Kit is a lightweight and sturdy platform for Sig Sauer P320 handguns, turning it into the ultimate Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Out Of Stock
The APL Compact provides 200 lumens of vibrant white light with up to 1.5 hours of runtime. Ultra-light and durable inside and out, weighing less than 2 ounces, it provides a high-intensity tight beam to fill your field of view for close to mid-range target identification. The water-resistant, glass reinforced polymer body is incredibly powerful and ultra-compact. Extensively tested, it mounts completely flush with the muzzle of a Glock 19 and offers constant and momentary operating modes. Textured paddles for a non-slip grip and ambidextrous on/off switches enable left or right hand activation. In addition, the easy-to-operate lockout system ensures the light isn’t activated until you’re ready.
*INCLUDES INFORCE APLc ONLY*
Fits Glock 17, 17L, 19, 20, 21, 22, 23, 24, 30, 31, 32, 34, 35, 37, 38, 40, 41
Out Of Stock
Holosun HS507C Micro Red Dot System from Holosun is a pistol-sized optic with an open frame for a great sight picture, clear glass and a rugged 7075 aluminum housing. It is powered by a CR2032 battery and Holosun’s innovative Solar Fail-safe back up. The HS507C will run up to 10 years on a single battery on setting 6, dot only. Featuring our Multi-reticle system, the HS507C allows the operator to switch the reticle between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only, all at the push of a button. Better yet, the same LED projects all three reticles, so no re-zeroing is necessary. It comes equipped with Holosun’s Shake Awake technology with last setting recall. This optic has our features in one tough, small package.
Thumb Rests for the MCK and Micro Roni platform! Set of two included, for left and right users. Attaches to the side Picatinny rails for any platform!
The Red Laser is designed specifically only for the MCK Platform. The flashlight has an on/off switch featured on the side. It includes both a laser component and a MCK adaptor casing.
The MCKFL Integral Front Flashlight is designed specifically only for the MCK Platform. The flashlight has an on/off switch featured on the side and has up to 500 lumens measured. It includes both a flashlight component and a MCK adaptor casing.
The MCKFL is an O-light powered by 1 CR123 lithium battery. Providing simplicity of operation and tremendous illuminating power in a small package and it uses a high-efficiency LED.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
NOT for use in the new Gen 5 models.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
NOT for use in the new Gen 5 models.
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
– Custom and Hand Made by Watchdog Tactical. Ideal for Everyday Carry (EDC).
– No Third Party Purchasing – Locally and Proudly Made in Charlotte, North Carolina by Veterans.
– Double Layered High Quality 1.5″ Scuba Webbing
– Kevlar Stitching for Very Strong and Extra Stiff Hold
– Cobra Belt Buckle – Rated at 1500 lbs. Max
*PLEASE READ SIZING NOTES*
Sizing note: Order your belt based on the pants size you wear. Our belts are designed to work +5 sizes from it’s smallest number size. For example a 34×36 belt will BEST fit a waist size 34-36″, but can also fit up to a 39″ waist. We’ve done this for maximum EDC comfort and practicality.
Sizes not listed: If your size is not listed, select from either option “Custom Size: Smaller 28” or “Custom Size: Larger 48” in the drop down box and state the size you need in the Notes. Please be sure to provide your measured pant size, this is very helpful in processing your order.
*Please allow a couple extra days for custom sizes to ship*
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Replacement screw set for any Under Cover holster. Total of 12 pieces. Pack contains:
Replacement screw set for any Attack or Guard Dog holster. Total of 20 pieces. Pack contains:
Replacement Malice strap for any Attack or Guard Dog holster. Large malice strap with 6 holes and comes with replacement screws. Can be used for IWB or OWB carry. 1 strap (5″).
Replacement soft loop for any Attack Dog, Guard Dog, Under Cover holster. Loop is adjustable and can be sized to 1.5″, 1.75″ or 2.0″. Can be used for IWB or OWB carry. Sold in a set of 2.
Replacement soft loop for any Attack Dog, Guard Dog Under Cover holster. Loop is adjustable and can be sized to 1.5″, 1.75″ or 2.0″. Can be used for IWB or OWB carry. 1 loop.
Replacement OWB/IWB Reversible clips for any Attack Dog, Guard Dog or Double Magazine holster. Comes with replacement screws. Used for OWB/IWB reversible carry. 2 clips.
Replacement OWB/IWB Reversible clip for any Attack Dog, Guard Dog or Double Magazine holster. Comes with replacement screws. Used for OWB/IWB reversible carry. 1 clip.
Replacement Paddle Clip for American Paddle holsters. Comes with replacement screws. Can be used for OWB carry. 1 clip.
Convenient low profile kydex wallet made in any color, all hand-made by Watchdog Tactical. Simplistic design for comfortable wear and durable last.
All Watchdog Tactical wallets are proudly made in the USA by veterans.
Get yourself a great quality wallet today!
Out Of Stock
✔ White Light & Green Laser
The Baldr Mini is an ultra-compact white light and green beam combo, integrating the compatibility of the PL-Mini 2 and the accuracy of the Baldr Pro.
The MCKP80 is only for Polymer80 frames that have either a standard Glock 17/19 slide OR Polymer80 frames with a V1/V2 slide
*Does Not fit standard Glock only compatible with Polymer 80
Fits Polymer 80 models V1/V2 for comparable Glock models 17/19/22/23/31
Comes with 2 Charging Handles (One for Glock slides and One for P80 slides)
Equipped with the MCKGEN2 Stabilizer which shoots folded and locked
Rear door extends an additional 15 degrees making it easier to insert and extract the handgun
Accommodates suppressor height sights
Suppressor friendly accommodating a suppressor up to 1.38” diameter
Features an improved spare magazine holder that operates with a mag catch and magazine release button
Compatible with the MCKGEN2 Brass Catcher
Comes standard with polymer top Picatinny rail
All of the Advantages of the MCK for your Polymer 80:
Suppressor/Compensator Ready
No pistol disassembly required—just place pistol into the kit, lock and go
Ergonomic Finger Groove Grip for more stability
Polymer top Picatinny rail for sights and optics
Side Picatinny rails for mounting additional accessories, i.e…thumb rests
Ambidextrous for fast and easy handling
Right-folding stock/arm brace for easy concealment and carry, locks in the folded position
Able to fire from the folded and locked position
Front spare magazine holder for faster reloads
Exposed slide release for direct contact and easier use
Out Of Stock
Bare Slide
Glock 48(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 48
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Bare Slide
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 23(40CAL) Stainless Steel slide with Front & Rear serrations
Match grade 40CAL Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 23(40CAL) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 40CAL Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 23(40cal) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 40cal Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
The BALDR Pro is a professional lighting tool with green laser sight and white LED for installation on equipment. Powered by two CR123A batteries, the max output of the BALDR Pro is 1350 lumens. The cool white LED and TIR lens makes for a robust search light. The center beam of the BALDR Pro is intense and concentrated, also soft and wide when near the ground. The white LED can also be set to 300 lumens of constant lighting. The beam emitted by the green laser is clearly visible during both night and day.
Equipped with adjustable screws; the light can withstand strong impacts and vibrations without loosening after calibration. It’s easy to install and detach the light by pressing or loosening the side swing arm. The main body of the product is made of aluminum alloy for extremely high strength and reliability. The BALDR Pro is a high-quality choice for professional users with its excellent ease of use, high brightness and extremely powerful performance.
The PL-2 Valkyrie is a super bright compact weapon light on the market using a CREE XHP35 HI Led delivering a scorching 1200 lumens.
The light uses two side by side CR123A batteries in common form factor to the industry for a known and comfortable feel. The light features a TIR optic lens providing a 245-meter-long focused beam that is still wide enough to see all around you to eliminate any blind spots in the dark. The heavy duty quick attach and release mounting system allows the light to have a tight hold on any firearm with a 1913 or Glock style rail.
The ambidextrous switch allows the user to continue to use their preferred grip on the firearm while still being able to activate the switch at a moment’s notice in a high-stress situation.
The PL-2 Valkyrie is a highly powerful self-defense tool which will blind an aggressor at close proximity indoors while still offering an extremely long distance for perfect use on rifles like the AR-15.
The PL-PRO Valkyrie (PL-PRO) is the rechargeable version of the best-selling weaponlight PL-2. Powered by a built-in rechargeable battery, the PL-PRO delivers two adjustable outputs; 1,500 and 300 lumens. The rail adapter allows the PL-PRO to be installed on weapons with a MIL-STD-1913 or Glock rail. It uses a heavy-duty quick attach and release mounting system along with the ambidextrous push-forward/side-press activation switch. The PL-PRO has been upgraded with a lockout mode and a magnetic port that is compatible with the MCC charging cable and remote pressure switch, making it more suitable for use on rifles. With high performance, ease of operation and versatility, the PL-PRO redefines the weaponlight.
*The magnetic remote pressure switch can be connected to the magnetic charging port, making the PL-PRO more suitable for use with a rifle.
*Rechargeable: charging directly by connecting the weaponlight with the included magnetic USB cable. There is no need to remove the battery or plug into a port that will wear out over time.
*Three output modes: momentary on, constant on, strobe.
*Manual quick attach and release mounting system.
*Silent ambidextrous ON/OFF switch for self defense. Push forward or tap the side of the switch to activate.
The PL-MINI 2 Valkyrie is the world’s first compact rechargeable weaponlight with an adjustable rail, which the user can adjust to any length making it compatible with most pistols including subcompacts. It delivers a maximum output of 600 lumens and a beam distance of 100 meters. With a quick attach and release mounting system, install and removal is accomplished within one second.
The switches are conveniently manipulated by pressing down quickly for constant on/off or hold for momentary-on.
The PL-MINI 2 is powered by a built-in lithium polymer battery, which can be charged through our signature magnetic charging port located at the bottom of the light.
With high compatibility, quick attach/release mounting system, and huge performance; the PL-Mini 2 is the optimal weaponlight choice for concealed carry.
FEATURES
✔ Adjustable rail(authorized patent): Slide the rail adapter back and forth freely to fix the light in the desired position for your specific firearm, making the PL-MINI 2 compatible with most pistols including subcompacts.
✔ Huge performance: 600 lumens with 100 meters of throw. Performance comparable to mid-sized weapon lights.
✔ Convenient charging by connecting the light directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time.
✔ Quick install and removal within one second.
✔ Compatible with both Glock (insert already installed) and Picatinny sized rails (insert included in the package).
✔ Ultra-compact and lightweight.
The BALDR RL is a professional lighting tool with red laser sight and white LED for installation on equipment with a Picatinny (MIL-STD-1913) or Glock rail. Powered by two CR123A batteries, the max output of the BALDR RL is 1,120 lumens. The neutral white LED and TIR lens makes for a robust search light. The center beam of the BALDR RL is intense and concentrated, also soft and wide when near the ground. The white LED can also be set to 300 lumens of constant lighting. The beam emitted by the red laser is clearly visible for accurate targeting. Equipped with adjustable screws, the light can withstand strong impacts and vibra- tions without loosening after calibration. It’s easy to install and detach the light by pressing or loosening the side swing arm. The main body of the product is made of aluminum alloy for extremely high strength and reliability. The BALDR RL is a high-quality budget choice for professional users with its excellent ease of use, high brightness and extremely powerful performance.
FEATURES:
(1) With extreme performance of 1,120 lumens and 240 meters beam distance, the BALDR RL is leading the way in compact rail lighting tools.
(2)Three light settings available: You can choose from white LED Only, red laser only, and white LED/ red laser combined by flipping a rotating switch underneath the weapon light.
(3) Safe and easy to adjust 5mW red laser for higher accuracy.
(4)Red laser is suitable for accurate targeting.
(5)Compatible with both Glock rail (installed on the product) and Picatinny rail (included in the package).
(6)Quick mount/detach system.
Out Of Stock
124-grain black-nickel coated bullets in boxes of 20 rounds.
Ballistic Data
Muzzle Velocity: 1105 fps
Muzzle Energy: 336 ft. lbs.
50yd Velocity: 1012 fps
50yd Energy: 282 ft. lbs.
Made For Guns WITHOUT Tactical Lights
The new Under Cover inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today. Each holster is custom made for each specific gun ensuring a perfect fit and positive retention. One of the most unique features of the Under Cover holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw. These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw. These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Made For Guns WITHOUT Tactical Lights
The outside the waistband AND inside the waistband (OWB & IWB) Guard Dog holster by Watchdog Tactical is the most versatile holster on the market today. This holster utilizes reversible clips that are secured onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Guard Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.
This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips. The clips also allow the user to adjust the height of the holster in relation to the belt. Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Get yourself a great quality holster today. Great for the range and everyday carry!!
Out Of Stock
COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*
Glock 48 upper w/ PF9SS Single Stack Glock 43 Frame
Slide is fully assembled
Glock 48(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 23(40CAL) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 40 CAL Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
The RL556v3™ features Polymer80’s proprietary polymer composite, a solid core design, flared magwell, and beefier mil-spec buffer tube housing. The pistol grip area features a unique thread less design specific to Polymer80 rifle lowers.
The kit includes:
80% Polymer AR15 Lower Receiver (Mil-spec)
Polymer Jig
Trigger Hole Drill Guide
Drill Bits and End Mill
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED .
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
200 Round Break in Period with full power ammo recommended
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
200 Round Break in Period with full power ammo recommended
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Dress up your Glock with this Metallic Parts Kit.
Kit includes the following parts:
Precision Extended Slide Lock
Trigger Pin
Trigger Housing Pin
Locking Block Pin
OEM Extended Slide Stop Lever.
Pins are CNC machined, stainless steel, refinished in chrome, titanium nitride, black oxide, or various cerakote colors… depending on your selection.
The included Extended Slide Lock is 3mm longer than the original (OEM) Glock Slide Lock. This handy item allows you to easily take down (field strip) your Glock pistol.
This parts kit fits all 3 pin Glocks excluding the G36. – 2 pins above the trigger, 1 pin in the backstrap (extended backstrap pin also included for Gen4 models).
Please note: Fits Gen2, Gen3 and Gen4.
The Action Enhancement Kit for Slim Frame Glock pistols (G43, G43X, G48) features the Apex Action Enhancement Trigger, with Trigger Bar, and an Apex Performance Connector. The kit is a direct drop-in replacement of the factory polymer trigger and connector and provides for a smoother trigger pull with reduced travel, reduced reset and a crisp break.
Expected Results
– Direct drop-in replacement of factory polymer trigger and connector
– Smooth uptake and reset
– Reduces trigger pre-travel, overall travel and reset distance
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
Applicable To What Gun(s)
For use in the following Glock model pistols: G43, G43X, G48.
Not for use in the Glock 42.
In The Package
1 ea. Red Anodized Apex Action Enhancement Trigger w/ Trigger Bar for Slim Frame Glock
1 ea. Apex Performance Connector
The Action Enhancement Kit for Slim Frame Glock pistols (G43, G43X, G48) features the Apex Action Enhancement Trigger, with Trigger Bar, and an Apex Performance Connector. The kit is a direct drop-in replacement of the factory polymer trigger and connector and provides for a smoother trigger pull with reduced travel, reduced reset and a crisp break.
Expected Results
– Direct drop-in replacement of factory polymer trigger and connector
– Smooth uptake and reset
– Reduces trigger pre-travel, overall travel and reset distance
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
Applicable To What Gun(s)
For use in the following Glock model pistols: G43, G43X, G48.
Not for use in the Glock 42.
In The Package
1 ea. Red Anodized Apex Action Enhancement Trigger w/ Trigger Bar for Slim Frame Glock
1 ea. Apex Performance Connector
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
NOT for use in the new Gen 5 models.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
Gen 5 Glock model pistols: G17, G19, G19x, G26, G34, G45.
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
Out Of Stock
Whether you call it a longslide Glock 19 or a grip-chopped Glock 17, the PF940CL is an industry first! Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics for an effective grip and improved recoil mitigation. Combining the length and accuracy of a Glock 17 with the concealability of a Glock 19, the PF940CL is a shooter’s dream come true. All parts are compatible with a Gen 3 Glock 17. For a flush-fit, be sure to use Glock 19 magazines!
Features
Next Generation Ergonomics
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny Accessory Rail
Serialization Plate
Stainless Steel Locking Block Rail System
Stainless Steel Drop-In Rear Rail Module
Hardened Front and Rear Rail System Pins
Complete Finishing Jig, Drill bits and End Mill Included
Compatible with Glock 17 Gen 3 Parts
Glock 19 grip length to accept Glock 19 magazines
Longslide version compatible with Gen 3 Glock 17 slide (not included)
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 26(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
GEN 2
8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.
Top Features:
SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
Upgraded Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
Perfect Red/Green Dot Optic
GEN 2
8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.
Top Features:
SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
Standard Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Upgraded Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
Perfect Red/Green Dot Optic
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Standard Kit includes:
Thumb Rest
Integral Front Flash Light
Front & Rear Polymer Pop Up Sights
Out Of Stock
COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*
Slide is fully assembled
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Slide is fully assembled
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*
Slide is fully assembled
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*
Slide is fully assembled
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*
Slide is fully assembled
Glock 43(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
200 Round Break in Period with full power ammo recommended
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
Out Of Stock
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
PF9SS™ 80% Subcompact Single Stack Frame. Offering compatibility with Glock® 43 Gen4 components, the PF9SS™ frame comes with an aggressive texture that emulates a stippled pattern, an extended beaver tail, double undercut trigger guard, and a thumb ledge.
Product Overview:
Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig and Drill Bits are included
Compatible with Gen 4 Glock® G43 Slide Assemblies
Compatible with Glock® G43 Magazines
Available in Black, with other colors arriving soon.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
Gen 5 Glock model pistols: G17, G19, G19x, G26, G34, G45.
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.
Top Features:
SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use
Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45
This Micro Conversion Kit is a lightweight and sturdy platform for S&W M&P9 2.0/M&P9 2.0 Compact/ M&P40 2.0/ M&P40 2.0 Compact handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
This Micro Conversion Kit is a lightweight and sturdy platform for Sig Sauer P320 handguns, turning it into the ultimate Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
Out Of Stock
The APL Compact provides 200 lumens of vibrant white light with up to 1.5 hours of runtime. Ultra-light and durable inside and out, weighing less than 2 ounces, it provides a high-intensity tight beam to fill your field of view for close to mid-range target identification. The water-resistant, glass reinforced polymer body is incredibly powerful and ultra-compact. Extensively tested, it mounts completely flush with the muzzle of a Glock 19 and offers constant and momentary operating modes. Textured paddles for a non-slip grip and ambidextrous on/off switches enable left or right hand activation. In addition, the easy-to-operate lockout system ensures the light isn’t activated until you’re ready.
*INCLUDES INFORCE APLc ONLY*
Fits Glock 17, 17L, 19, 20, 21, 22, 23, 24, 30, 31, 32, 34, 35, 37, 38, 40, 41
Out Of Stock
Holosun HS507C Micro Red Dot System from Holosun is a pistol-sized optic with an open frame for a great sight picture, clear glass and a rugged 7075 aluminum housing. It is powered by a CR2032 battery and Holosun’s innovative Solar Fail-safe back up. The HS507C will run up to 10 years on a single battery on setting 6, dot only. Featuring our Multi-reticle system, the HS507C allows the operator to switch the reticle between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only, all at the push of a button. Better yet, the same LED projects all three reticles, so no re-zeroing is necessary. It comes equipped with Holosun’s Shake Awake technology with last setting recall. This optic has our features in one tough, small package.
Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.
Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.
Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.
Thumb Rests for the MCK and Micro Roni platform! Set of two included, for left and right users. Attaches to the side Picatinny rails for any platform!
The Red Laser is designed specifically only for the MCK Platform. The flashlight has an on/off switch featured on the side. It includes both a laser component and a MCK adaptor casing.
The MCKFL Integral Front Flashlight is designed specifically only for the MCK Platform. The flashlight has an on/off switch featured on the side and has up to 500 lumens measured. It includes both a flashlight component and a MCK adaptor casing.
The MCKFL is an O-light powered by 1 CR123 lithium battery. Providing simplicity of operation and tremendous illuminating power in a small package and it uses a high-efficiency LED.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
NOT for use in the new Gen 5 models.
The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break.
Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values
NOT for use in the new Gen 5 models.
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
– Custom and Hand Made by Watchdog Tactical. Ideal for Everyday Carry (EDC).
– No Third Party Purchasing – Locally and Proudly Made in Charlotte, North Carolina by Veterans.
– Double Layered High Quality 1.5″ Scuba Webbing
– Kevlar Stitching for Very Strong and Extra Stiff Hold
– Cobra Belt Buckle – Rated at 1500 lbs. Max
*PLEASE READ SIZING NOTES*
Sizing note: Order your belt based on the pants size you wear. Our belts are designed to work +5 sizes from it’s smallest number size. For example a 34×36 belt will BEST fit a waist size 34-36″, but can also fit up to a 39″ waist. We’ve done this for maximum EDC comfort and practicality.
Sizes not listed: If your size is not listed, select from either option “Custom Size: Smaller 28” or “Custom Size: Larger 48” in the drop down box and state the size you need in the Notes. Please be sure to provide your measured pant size, this is very helpful in processing your order.
*Please allow a couple extra days for custom sizes to ship*
This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.
keep up with our latest designs and promotions
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
