Gun Parts

APEX ACTION ENHANCEMENT TRIGGER W/ GEN 3 TRIGGER BAR-BLACK

$100.00

The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break. 

Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39

Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values


NOT for use in the new Gen 5 models.

Add to cart

APEX ACTION ENHANCEMENT TRIGGER W/ GEN 3 TRIGGER BAR-RED

$105.00

The Apex Action Enhancement Trigger, with Gen 3 Factory Trigger Bar, for Glock is a direct drop-in replacement of the factory polymer trigger and reduces overall trigger travel while providing smooth uptake and reset with a crisp trigger break. 

Applicable To What Gun(s)
For use in the following Glock model pistols (including Gen 4 versions): G17, G17L, G19, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39

Expected Results
– Direct drop-in replacement of factory polymer trigger
– Reduces trigger over travel and reset distance
– Smooth uptake and reset
– Crisp trigger break
– Center mounted pivoting safety maintains factory safety values


NOT for use in the new Gen 5 models.

Add to cart

FRONT & REAR IRON SIGHTS

$30.00
  • Pull Up, Push Down When Not in Use
  •  Iron Sights, BUIS, Flip Up Polymer Mold Sights with Integral Picatinny Mount
  • Highly Durable, Level 3 Mil-Spec, Hard Anodized, Heat Treated
  • Both mount on same Plane or Level, Rear sight on flat-top, front sight on hand guard top rail or on high profile block

 

Add to cart

HOLOSUN HS507C

$260.00

Holosun HS507C Micro Red Dot System from Holosun is a pistol-sized optic with an open frame for a great sight picture, clear glass and a rugged 7075 aluminum housing. It is powered by a CR2032 battery and Holosun’s innovative Solar Fail-safe back up. The HS507C will run up to 10 years on a single battery on setting 6, dot only. Featuring our Multi-reticle system, the HS507C allows the operator to switch the reticle between a 32 MOA circle with 2 MOA dot, a 2 MOA dot only, or a 32 MOA ring only, all at the push of a button. Better yet, the same LED projects all three reticles, so no re-zeroing is necessary. It comes equipped with Holosun’s Shake Awake technology with last setting recall. This optic has our features in one tough, small package.

Add to cart

INFORCE APLc

$100.00

The APL Compact provides 200 lumens of vibrant white light with up to 1.5 hours of runtime. Ultra-light and durable inside and out, weighing less than 2 ounces, it provides a high-intensity tight beam to fill your field of view for close to mid-range target identification. The water-resistant, glass reinforced polymer body is incredibly powerful and ultra-compact. Extensively tested, it mounts completely flush with the muzzle of a Glock 19 and offers constant and momentary operating modes. Textured paddles for a non-slip grip and ambidextrous on/off switches enable left or right hand activation. In addition, the easy-to-operate lockout system ensures the light isn’t activated until you’re ready.

*INCLUDES INFORCE APLc ONLY*

Fits Glock 17, 17L, 19, 20, 21, 22, 23, 24, 30, 31, 32, 34, 35, 37, 38, 40, 41
Select options

INTEGRAL FRONT FLASHLIGHT FOR MCK

$68.00

The MCKFL Integral Front Flashlight is designed specifically only for the MCK Platform. The flashlight has an on/off switch featured on the side and has up to 500 lumens measured. It includes both a flashlight component and a MCK adaptor casing.

The MCKFL is an O-light  powered by 1 CR123 lithium battery. Providing simplicity of operation and tremendous illuminating power in a small package and it uses a high-efficiency LED.

Add to cart

Micro Conversion Kit GEN 2 Glock 17, 19, 19X, 22, 23, 31, 32, 45

$299.99

PRE ORDERS ONLY! SHIPPING 2ND WEEK IN FEBRUARY

8 Advantages over the first gen MCK:
1. The Gen 2 MCK features a new extended stabilizer which allows the user to fire the Gen 2 MCK in the folded and locked position. The new stabilizer is compatible with Gen 1 MCKs as well.
2. The Gen 2 rear door extends back an additional 15 degrees, making it easier to insert and extract the handgun.
3. The Gen 2 MCK accommodates suppressor height sights.
4. The Gen 2 MCK features a new charging handle which makes more surface contact with the rear of the handgun slide.
5. The Gen 2 MCK features an aluminum top picatinny rail for improved stability, durability, and accuracy.
6. The Gen 2 MCK accepts CAA USA’s new brass catcher, made especially for our latest generation MCK. (Sold separately)
7. The Gen 2 MCK features an improved spare magazine holder that operates with a mag catch and magazine release button.
8. The Gen 2 MCK is suppressor friendly and can accommodate a suppressor up to 1.38” diameter.

Top Features:

SUPRESSOR/COMPENSATOR READY
No pistol disassembly required – Just place pistol into the kit, lock, and go
Allows for multiple handgun models into one platform
Ergonomic Finger Groove Grip for more stability
Top aluminum Picatinny rail, allowing a combination of sights and/or optics
Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
Ambidextrous fast and easy handling
Right-folding stock arm brace for easy concealment and carry, locks in the folded position.
Now able to fire while stabilizer is folded.
Front spare magazine holder for a faster reload
Built-in charging handle allowing for quicker assembly/disassembly
Exposed slide release for direct contact and easier use

Fits: Glock 17, 19, 19X, 22, 23, 31, 32, 45

Select options

Micro Conversion Kit Glock 17, 19, 19X, 22, 23, 31, 32, 45 (RONI)

$249.99

This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.

Select options

Micro Conversion Kit Glock 20/21 (RONI)

$249.99

This Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.

Select options

Micro Conversion Kit Sig Sauer P320 (RONI)

$249.99

This Micro Conversion Kit is a lightweight and sturdy platform for Sig Sauer P320 handguns, turning it into the ultimate Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.

Select options

Micro Conversion Kit Smith & Wesson (RONI)

$249.99

This Micro Conversion Kit is a lightweight and sturdy platform for S&W M&P9 2.0/M&P9 2.0 Compact/ M&P40 2.0/ M&P40 2.0 Compact handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. The extended stabilizer, enables one-handed firing for better shooting performance. It also comes with a Velcro strap fastener which provides a custom fit to any user. MCK is the most cost effect conversion kit in the world. Fastest assembly/disassembly conversion kit on the market. Improving accuracy dramatically up to 200 yards.

Select options

PF940C 80% COMPACT FRAME KIT

$149.99

Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.

 

  • The PF940C is compatible with Glock Gen3 G19/23 (3-Pin).
  • Next Generation Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Drop-In Rear Rail Module (RRM™)
  • Hardened Pins for LBRS™ and RRM™
  • Complete Finishing Jig, Drill bits and End Mill Included
Select options

PF940SC 80% SUBCOMPACT FRAME KIT

$149.99

Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.

 

  • The PF940SC is compatible with Glock Gen3 G26/27 (3-Pin).
  • Next Generation Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Drop-In Rear Rail Module (RRM™)
  • Hardened Pins for LBRS™ and RRM™
  • Complete Finishing Jig, Drill bits and End Mill Included
Select options

PF940V2 80% FULL SIZE FRAME KIT

$149.99

Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.

 

  • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
  • Next Generation Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Drop-In Rear Rail Module (RRM™)
  • Hardened Pins for LBRS™ and RRM™
  • Complete Finishing Jig, Drill bits and End Mill Included
Select options

RED LASER FOR MCK

$89.00

The Red Laser is designed specifically only for the MCK Platform. The flashlight has an on/off switch featured on the side. It includes both a laser component and a MCK adaptor casing.

 

Add to cart

THUMB RESTS FOR MCK

$18.00

Thumb Rests for the MCK and Micro Roni platform! Set of two included, for left and right users. Attaches to the side Picatinny rails for any platform!

 

Add to cart