Showing 1–16 of 178 results
Kydex outside the waistband Magpul Pmag holster by Watchdog Tactical. Belt clips attach securely with molle straps and improve efficiency by allowing spare mags to be readily available and accessible.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Kydex outside the waistband double mag holster by Watchdog Tactical. Belt clips attach securely with belt clips and improve efficiency by allowing spare mags to be readily available and accessible.
All Watchdog Tactical holsters are proudly made in the USA by veterans.
Elastic single magazine or multi-tool holder made by Watchdog Tactical. This durable elastic holder attaches securely onto the belt and improves efficiency by allowing spare mags, multi-tool and even handheld light to be readily available and accessible yet still completely concealed.
All Watchdog Tactical holders are proudly made in the USA by Veterans.
Shopping for someone else but not sure what to give them? Give them the gift of choice with a WatchDog Tactical gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED .
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
200 Round Break in Period with full power ammo recommended
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
200 Round Break in Period with full power ammo recommended
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
200 Round Break in Period with full power ammo recommended
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
Out Of Stock
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Slide is fully assembled
Glock 17(9MM) Stainless Steel slide with Front & Rear serrations
Match grade 9MM Barrel
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Out Of Stock
Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!
Slide is fully assembled
Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts
Match grade 9MM Barrel, Flat Fluted, Flush Cut,
Upper Parts Kit installed
OEM Sights installed
Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)
Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3
Warning:
This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.
“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.
DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.
Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.