BUILD KITS

*Polymer 80 Guard Dog Holster*

$64.99

 

Made For Guns WITHOUT Tactical Lights

The outside the waistband AND inside the waistband (OWB & IWB) Guard Dog holster by Watchdog Tactical is the most versatile holster on the market today.  This holster utilizes reversible clips that are secured onto the belt for extra security when drawing the weapon. Its reversible clips can be switched from outside to inside which gives the user our awesome OWB or IWB option – essentially making this holster 2 holsters in 1! With the Guard Dog, the weapon hugs the contour of the body allowing the closest carry of any holster available on the market today.

This holster allows the user to adjust for cant simply by adjusting the height of the two reversible clips.  The clips also allow the user to adjust the height of the holster in relation to the belt.  Retention adjustment is as simple as loosening or tightening the retention screws for the perfect draw.

All Watchdog Tactical holsters are proudly made in the USA by veterans.

Get yourself a great quality holster today. Great for the range and everyday carry!!

 

*Polymer 80 Under Cover Holster*

$54.99

Made For Guns WITHOUT Tactical Lights

The new Under Cover inside the waistband holster made by Watchdog Tactical is one of the best options for deep concealed carry available on the market today.  Each holster is custom made for each specific gun ensuring a perfect fit and positive retention.  One of the most unique features of the Under Cover holster is the ability to adjust from 0 to 15 degrees of cant with a simple adjustment of the clip screw.  These holsters also allow the user to modify the tension of the holder in the weapon with a simple tightening or loosening of a screw.  These holsters are a minimalist design and add almost zero bulk to the overall size of the weapon, therefore increasing comfortability and decreasing visibility while carrying.

All Watchdog Tactical holsters are proudly made in the USA by veterans.

Sale!
Out Of Stock

Glock 17 Complete Upper-Blk/Blk-(No cuts)

$350.00 $300.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED .

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

200 Round Break in Period with full power ammo recommended

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.

Sale!
Out Of Stock

Glock 17 Complete Upper-FDE/BLK

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

200 Round Break in Period with full power ammo recommended

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.

Sale!
Out Of Stock

Glock 17 Complete Upper-Gray/Blk

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

200 Round Break in Period with full power ammo recommended

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.

Out Of Stock

Glock 17 Complete Upper-Gray/Silver

$450.00

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 17 Complete Upper-OD Green

$450.00

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.

200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 17 Standard Complete Upper-Black/Blk

$350.00 $320.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 17 Standard Complete Upper-Black/Silver

$350.00 $320.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.

200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 17 Standard Complete Upper-OD Green

$350.00 $320.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 17 Standard Complete Upper-Silver

$350.00

Slide is fully assembled

Glock 17(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 17 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-Black/Black

$350.00 $300.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-Black/Black (front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-Black/Black (front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-FDE (front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-FDE/Black

$350.00 $300.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-FDE/Black (front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-Gray(front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-Gray/Black

$350.00 $300.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Complete Upper-Silver

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Standard Complete Upper-Black

$350.00 $320.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 19 Standard Complete Upper-Gray

$350.00 $320.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 19(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 23 Complete Upper-FDE (front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 23(40cal) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 40cal Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 23 Complete Upper-Gray(front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 23(40CAL) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 40CAL Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 23 Complete Upper-OD Green

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 23(40CAL) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 40 CAL Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel

40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 23 Standard Complete Upper-Black

$350.00 $320.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 23(40CAL) Stainless Steel slide with Front & Rear serrations

Match grade 40CAL Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 23 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
40CAL
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 26 Complete Upper-Black/Black (3 front cuts)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 26 Complete Upper-Black/Black (front cut)

$450.00 $420.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 26 Complete Upper-Gray/Black (3 front cuts)

$450.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 26 Complete Upper-Gray/Black (front cut)

$450.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 26 Complete Upper-OD Green/Black (front cut)

$450.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 26 Standard Complete Upper-Black/Black

$350.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 26 Standard Complete Upper-FDE/Black

$350.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 26 Standard Complete Upper-Gray/Black

$350.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Sale!
Out Of Stock

Glock 26 Standard Complete Upper-OD Green/ Black

$350.00 $320.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 26 Standard Complete Upper-OD Green/Gold

$350.00

Complete upper & lower if added for $150 only.
LOWER PARTS KIT NOT INCLUDED!

Slide is fully assembled

Glock 26(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 26
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 43 Bare Slide-Black

$190.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Bare Slide-Black (front cuts)

$200.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Bare Slide-FDE

$190.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Bare Slide-FDE (front cuts)

$200.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Bare Slide-Gray

$190.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Bare Slide-Gray (front cuts)

$200.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Bare Slide-OD Green

$190.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Bare Slide-OD Green (front cuts)

$200.00

Bare Slide

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Out Of Stock

Glock 43 Long Complete Upper-Black/Black (front cuts)

$420.00

COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*

Glock 48 upper w/ PF9SS Single Stack Glock 43 Frame

Slide is fully assembled

Glock 48(9MM) Stainless Steel slide with Rear serrations & Front Cuts

Match grade 9MM Barrel, Flat Fluted, Flush Cut,

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 19 Gen 1-3
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts
Optic Ready(Trijicon & Holosun)

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 43 Standard Complete Upper-Black/Black

$350.00

COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*

Slide is fully assembled

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 43 Standard Complete Upper-Black/Black(w/cuts)

$350.00

COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*

Slide is fully assembled

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 43 Standard Complete Upper-FDE/Black

$350.00

COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*

Slide is fully assembled

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 43 Standard Complete Upper-Gold/Black

$350.00

Slide is fully assembled

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 43 Standard Complete Upper-OD Green/Black

$350.00

COMPLETE UPPER
*LOWER FRAME, OEM LOWER PARTS KIT & 6RD PRO MAG INCLUDED IF ADDED FOR $180*

Slide is fully assembled

Glock 43(9MM) Stainless Steel slide with Front & Rear serrations

Match grade 9MM Barrel

Upper Parts Kit installed

OEM Sights installed

Slide
Heat Treated 17-4 Stainless Steel
OEM Internal Specs
Fits Glock 43
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Barrel
9mm
Drop in fit
Machined from 416 stainless steel and heat treated to RC 41
Fully supported chamber and improved feed ramp design
Target crown and oversized lock up area
Conventional rifling with a polished chamber and bore to perform well with lead, plated and jacketed bullets
Reduces group size by 1/3

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

Magazine can not be shipped to the following states: CA, CT, CO, DC, HI, MA, MD, NJ, NY, and VT.
200 Round Break in Period with full power ammo recommended

Out Of Stock

Glock 48 Bare Slide-Black (front cuts)

$200.00

Bare Slide

Glock 48(9MM) Stainless Steel slide with Front & Rear serrations

Heat Treated 17-4 Stainless Steel
Fits Glock 48
Fits(And Matches) Polymer80
Standard Front & Rear Sight Cuts

Warning:

This product is to be installed by a competent gunsmith.No liability is expressed or implied for damage or injury which may result from installation or use of this product.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. wdtactical.com
is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: At Watchdog Tactical, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. Watchdog Tactical is not responsible for improper builds, damage or injury due to user error.

PF940C 80% COMPACT FRAME KIT

Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.

 

  • The PF940C is compatible with Glock Gen3 G19/23 (3-Pin).
  • Next Generation Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Drop-In Rear Rail Module (RRM™)
  • Hardened Pins for LBRS™ and RRM™
  • Complete Finishing Jig, Drill bits and End Mill Included
Out Of Stock

PF940CL 80% COMPACT LONGSLIDE FRAME KIT

$149.99

Whether you call it a longslide Glock 19 or a grip-chopped Glock 17, the PF940CL is an industry first! Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics for an effective grip and improved recoil mitigation. Combining the length and accuracy of a Glock 17 with the concealability of a Glock 19, the PF940CL is a shooter’s dream come true. All parts are compatible with a Gen 3 Glock 17. For a flush-fit, be sure to use Glock 19 magazines!

Features

Next Generation Ergonomics
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny Accessory Rail
Serialization Plate
Stainless Steel Locking Block Rail System
Stainless Steel Drop-In Rear Rail Module
Hardened Front and Rear Rail System Pins
Complete Finishing Jig, Drill bits and End Mill Included
Compatible with Glock 17 Gen 3 Parts
Glock 19 grip length to accept Glock 19 magazines
Longslide version compatible with Gen 3 Glock 17 slide (not included)

PF940SC 80% SUBCOMPACT FRAME KIT

Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.

 

  • The PF940SC is compatible with Glock Gen3 G26/27 (3-Pin).
  • Next Generation Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Drop-In Rear Rail Module (RRM™)
  • Hardened Pins for LBRS™ and RRM™
  • Complete Finishing Jig, Drill bits and End Mill Included

PF940V2 80% FULL SIZE FRAME KIT

Includes 80% Pistol Frame, Jig, and all of the tooling required to finish the pistol using a drill press & cross-vise.

 

  • The PF940v2™ is compatible with components for 3-pin 9mm G17, 34, 17L; .40S&W G22, 35, 24; and .357Sig G31.
  • Next Generation Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Drop-In Rear Rail Module (RRM™)
  • Hardened Pins for LBRS™ and RRM™
  • Complete Finishing Jig, Drill bits and End Mill Included
Out Of Stock

PF9SS SINGLE STACK GLOCK 43 FRAME KIT

$149.99

PF9SS™ 80% Subcompact Single Stack Frame. Offering compatibility with Glock® 43 Gen4 components, the PF9SS™ frame comes with an aggressive texture that emulates a stippled pattern, an extended beaver tail, double undercut trigger guard, and a thumb ledge.

Product Overview:

Enhanced Ergonomics and Features
High-Strength Reinforced Polymer Construction
Aggressive and Adaptable Grip Texture
Picatinny/STANAG Compliant Accessory Rail
Blank Serialization Plate
Stainless Steel Locking Block Rail System (LBRS™)
Stainless Steel Rear Rail Module (RRM™)
Hardened Pins for LBRS ™ and RRM™
Complete Finishing Jig and Drill Bits are included
Compatible with Gen 4 Glock® G43 Slide Assemblies
Compatible with Glock® G43 Magazines
Available in Black, with other colors arriving soon.

RL556v3 80% AR15 Lower

The RL556v3™ features Polymer80’s proprietary polymer composite, a solid core design, flared magwell, and beefier mil-spec buffer tube housing. The pistol grip area features a unique thread less design specific to Polymer80 rifle lowers.

The kit includes:

80% Polymer AR15 Lower Receiver (Mil-spec)
Polymer Jig
Trigger Hole Drill Guide
Drill Bits and End Mill